Menu
Download Casio G-Shock instruction manuals by model and module number in PDF format. For older models not listed visit support.casio.com to search by module number. (The module number can be found on the case back of the watch. It is the number that has a rectangular outline around it.) For languages other than English, please visit world.casio.com. G-SHOCK Official website. Product information of GA-201-1A. High value combination Very mechanical and very metal, the gears and dials of these models make each glance of the dial a visual adventure.
Advertising
Operation Guide 5229
MO1106-EA
E-1
About This Manual
• Depending on the model of your watch, digital display
text appears either as dark figures on a light background
or light figures on a dark background. All sample displays in this manual are shown using dark figures on a light background.
• Button operations are indicated using the letters shown
in the illustration.
• Note that the product illustrations in this manual are
intended for reference only, and so the actual product
may appear somewhat different than depicted by an illustration.
E-2
• Each section of this manual provides you with the information you need to perform
operations in each mode. Further details and technical information can be found in
the “Reference” section.
E-3
Contents
General Guide ..................................................... E-6
Timekeeping ...................................................... E-8
Stopwatch ....................................................... E-14
Countdown Timer ................................................. E-25
World Time ....................................................... E-29
Alarms .......................................................... E-33
Illumination ...................................................... E-38
Hand Home Position Correction ..................................... E-42
Reference ....................................................... E-44
Specifications .................................................... E-48
E-4
Procedure Lookup
The following is a handy reference list of all the operational procedures contained in
this manual.
To set the digital time and date ....................................... E-9
To change the Daylight Saving Time (summer time) setting .............. E-12
To specify a distance value ......................................... E-16
To specify lap time or split time readings ............................. E-18
To perform elapsed time measurement ............................... E-19
To set up the stopwatch to take lap time readings ...................... E-20
To perform a lap time measurement .................................. E-21
To set up the stopwatch to take split time readings ..................... E-22
To perform a split time measurement ................................. E-23
To measure times with the stopwatch ................................ E-24
E-5
To use the countdown timer ........................................ E-26
To configure countdown start time and auto-repeat settings ............. E-27
To view the current time in another time zone .......................... E-30
To toggle a city code time between Standard Time and Daylight Saving Time ...
E-31
To swap your Home City and World Time City .......................... E-32
To set an alarm time ............................................... E-34
To turn an alarm on and off ......................................... E-36
To turn the Hourly Time Signal on and off ............................. E-37
To illuminate the face manually ...................................... E-38
To specify the illumination duration .................................. E-39
To turn the auto light switch on and off ............................... E-41
To adjust home positions ........................................... E-42
E-6
General Guide
• Press C to change from mode to mode.
• In any mode (except a setting mode), press B to illuminate the face.
Timekeeping Mode
C
▲
C
E-7
Alarm Mode (page E-33)
Countdown Timer Mode (page E-25)
World Time Mode (page E-29)
Stopwatch Mode (page E-14)
▲
▲
▲
▲
C
C
C
E-8
Timekeeping
You can adjust the Home Time city date and time in the Timekeeping Mode.
• The analog time of this watch is synchronized with the digital time. The analog time
setting is adjusted automatically whenever you change the digital time.
• If the analog time does not match the digital time for any reason, use the procedure
described under “To adjust home positions” (page E-42) to match the analog setting
to the digital setting.
• Pressing D in the Timekeeping Mode toggles digital display between the Home City
Date and Home City Time.
D
Home City Date
Home City Time
▲
▲
Day of week
Month Day
PM indicator
Hour : Minutes
Day of week
Seconds
Seconds
E-9
To set the digital time and date
1. In the Timekeeping Mode, hold down
A for about three
seconds until the currently selected city code flashes in
the right digital dial. This is the setting mode.
2. Use
D (east) and B (west) to display the city code
you want to select.
• Make sure you select your Home City code before
changing any other setting.
• For full information on city codes, see the “City Code
Table” at the back of this manual.
City code
PM indicator
Hour : Minutes
Seconds
Advertising
This manual is related to the following products:
Popular Brands
Popular manuals
Advertising
Operation Guide 5229
E-20
Lap Time
Lap time readings appear in the left digital dial. They show
the time elapsed since the last lap time reading was taken.
• If you want the watch to calculate the speed of each lap
(when all of the laps are the same distance), specify the
lap distance for the distance setting (page E-15).
• If you want the watch to calculate the speed of the entire
race, specify the race distance for the distance setting
(page E-15). A speed will be indicated each time you take a lap reading, but these lap speeds will not indicate actual speed of the entire race.
To set up the stopwatch to take lap time readings
1. In the Stopwatch Mode, make sure the stopwatch is stopped and reset to all zeros.
• If you need to reset the stopwatch to all zeros, press A.
2. Make sure that
LAP
(lap times) is shown in the left digital dial.
• If
SPL
(split times) is displayed, press
A to toggle it to
LAP
.
Lap time
E-21
To perform a lap time measurement
Select lap time (
LAP
) measurement and then perform the
following button operations.
D Start ➝ A Lap* ➝ A Lap* ➝ D Stop ➝ A Reset * Lap time remains frozen in the left digital dial for about
12 seconds. After that, elapsed time measurement
reappears.
• You can press A to take lap readings as many times as
you like.
• While a lap time is displayed, the right digital dial will
alternate between the lap number (#01 to #99) and the
lap hour value. If you take more than 99 lap readings, the lap number will restart from #00 following lap #99.
• Pressing D to stop elapsed time measurement displays
the time (and speed if a distance is specified) of the final
lap.
Lap number
Speed hand
(calculated)
Minutes
Seconds
1/1000 seconds
Hours
E-22
Split Time
Split time readings appear in the left digital dial. They
show the time elapsed since the beginning of the current time measurement.
• If you want the watch to calculate the speed of the race,
specify the race distance for the distance setting (page
E-15).
• For split time readings, you can specify the total race
distance only. Though the watch will indicate a speed
each time you take a split reading, they will be based on the total race distance, and so they will not indicate actual intermediate split speeds.
To set up the stopwatch to take split time readings
1. In the Stopwatch Mode, make sure the stopwatch is stopped and reset to all zeros.
• If you need to reset the stopwatch to all zeros, press A.
2. Make sure that
SPL
(split times) is shown in the left digital dial.
• If
LAP
(lap times) is displayed, press
A to toggle it to
SPL
.
Split time
E-23
To perform a split time measurement
Select split time (
SPL
) measurement and then perform
the following button operations.
D Start ➝ A Split ➝ A Split Release* ➝ D Stop ➝
A Reset
* The split time is released automatically if you do not
press
A within about 12 seconds.
• You can press A to take split readings as many times
G Shock Ga 201 Manual
as you like.
• The stopwatch continues elapsed time measurement
internally while a split time reading is displayed.
• Pressing A while a split time is displayed will switch
back to normal elapsed time measurement. The elapsed
time will appear in the left digital dial.
• You also could press D to stop elapsed time
measurement instead.
• Pressing D to stop elapsed time measurement displays
the time (and speed if a distance is specified) of the final
split (which is the overall elapsed time).
Hours
Speed hand
(calculated)
Minutes
Seconds
1/1000 seconds
E-24
To measure times with the stopwatch
Elapsed Time
Lap Time
Split Time
D
Start
Stop
Reset
D
➤
➤ A
D
Start (
SPL
displayed)
Split
Split release
Stop
A
D
A
➤
➤
➤
Reset
A
➤
D
Start (
LAP
displayed)
Lap
(Lap01)
Stop
Reset
D
A
A
➤
➤
➤
A
➤
Lap
(Lap02)
E-25
Countdown Timer
You can set the countdown start time within a range of
one minute to 24 hours. An alarm sounds when the countdown reaches zero.
Lenovo yoga tab 3 10.1. The manual is automatically downloaded on the desktop or in the file downloads of your computer.The same way is also possible if you prefer to search by choosing the menu:.A complete help is available by the menu:.All our user guides are for PDF format (Portable Document Format). Lenovo IdeaPad Series.Lenovo IdeaTab Series.Lenovo Miix Series.Lenovo Mototab Series.Lenovo Phab Series.Lenovo S Series.Lenovo Smart Tab Series.Lenovo Tab Series. DOWNLOAD INFORMATION: To download a user guide, please go to the category of your equipment, choose the brand of your equipment, then click on the model which you are looking for. To download free the most recent version of this software. To view the documents, you must have Adobe Reader installed on your computer.
• You also can select auto-repeat, which automatically
restarts the countdown from the original value you set
whenever zero is reached.
• All of the operations in this section are performed in the
Countdown Timer Mode, which you enter by pressing
C (page E-7).
Seconds
Auto-repeat off
Start time
(Hours : Minutes)
E-26
To use the countdown timer
Press
D while in the Countdown Timer Mode to start the countdown in the left digital
dial.
• When the end of the countdown is reached, the alarm will sound for 10 seconds or
until you stop it by pressing any button.
• If auto-repeat is turned off, the countdown time is reset to its starting value
automatically after the alarm stops.
• If auto-repeat is turned on, the countdown will restart automatically without pausing
when it reaches zero.
• The countdown timer measurement operation continues even if you exit the
Countdown Timer Mode.
• Press D while a countdown operation is in progress to pause it.
Press
D again to resume the countdown.
• To stop a countdown timer operation completely, first pause it (by pressing D), and
then press
A. This returns the countdown time to its starting value.
E-27
To configure countdown start time and auto-repeat settings
1. While the countdown start time is shown in the left
digital dial in the Countdown Timer Mode, hold down
A
for about three seconds until the hour setting of the
countdown start time starts to flash. This is the setting mode.
• If the countdown start time is not displayed, use the
procedure under “To use the countdown timer” (page
E-26) to display it.
2. Press
C to move the flashing in the sequence shown
below, and select the setting you want to change.
Start Time
(Minutes)
Auto-Repeat
On/Off
Start Time
(Hours)
3. Perform the following operations, depending on which setting is currently selected
in the left digital dial.
• While the start time setting is flashing, use D (+) and B (–) to change it.
• To toggle auto repeat between on and off, press D while the on/off setting is
flashing in the left digital dial.
Start time
(Hours : Minutes)
Auto-repeat on
E-28
4. Press
A to exit the setting mode.
• The auto-repeat on (
The screen was scratched, the battery was garbage after 3 years, browing the internet was a pain in the A$$, 3G partially worked. Even tho it was cheap it had all the functionalities.The problem lied on it's processor, Ram, internal storage and unable to move apps to the SD card. Sony ericsson xperia pro. 3 years later i bought a Nexus 5 in 2014.Now that is a phone, still using it today.Back to the X8, it had a good camera back then, but with so many issues coming. So ye, i was happy overall with it, it did the job but it took it's time xDWhen technology evolved I had too. It was nice, it was a gift.
) indicator is displayed on the Countdown Timer Mode
screen while this function is turned on.
E-29
World Time
World Time digitally displays the current time in one of
48 cities (29 time zones) around the world. A simple operation swaps your Home City with the currently selected World Time City.
• The times kept in the World Time Mode are
G Shock Ga 201 Manual Pdf
synchronized with the time being kept in the
Timekeeping Mode. If you feel that there is an error in any World Time Mode time, check to make sure you have the correct city selected as your Home City. Also check to make sure that the current time as shown in the Timekeeping Mode is correct.
• Times in the World Time Mode are based on UTC
offsets. See the “City Code Table” at the back of this
manual for information about the UTC offsets that are supported.
• All of the operations in this section are performed in the World Time Mode, which
you enter by pressing
C (page E-7).
Currently selected
World Time City
World Time
Advertising
This manual is related to the following products:
Casio G Shock Ga 201
Popular Brands
G Shock Ga 110 Manual
Popular manuals
Comments are closed.
|
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
November 2020
Categories |